crwdns2915892:0crwdne2915892:0
The device should be turned off and the battery and memory card removed before you start the guide.
crwdns2942213:0crwdne2942213:0
-
-
Remove the three screws on the bottom of the camera using the 00 sized phillips head screw driver.
-
-
-
Remove the four screws on the left side of the camera.
-
-
-
Remove the screw on the right side of the camera.
-
-
-
Open up the HDMI port on the right side of the camera. Then remove the screw in the HDMI port.
-
-
-
-
Remove the screw to the right of the view finder on the rear of the camera.
-
-
-
Use the spudger to crack open the case.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
-
The rear cover is now unattached from the camera.
-
-
-
Push the button on the bottom right of the camera and then remove the plastic surrounding the lens.
-
-
-
Use the spudger to pop off front case.
-
-
-
Pull the loosened cover off and you are finished.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:03crwdne2935229:0