crwdns2915892:0crwdne2915892:0
This guide will teach you how to replace your printer's right side transformer. Do not touch anything other than what is specified, specifically on the green board. You may accidentally short or damage the electrical configurations or give yourself an electric shock.
crwdns2942213:0crwdne2942213:0
-
-
Lift the printer lid up as shown in the photo.
-
-
-
Locate and remove the two 10mm side screws. There is one on each side.
-
-
-
Unhook the plastic panel from the printer starting from the top.
-
To remove the bottom part of the paneling gently lay the printer on its back.
-
-
-
-
Gently unhook the right side paneling (as looking at the printer's front face) from the printer.
-
-
-
Locate the yellow wire connected to the metal box.
-
Carefully pull the yellow wire from the black connector.
-
-
-
Locate the spring.
-
Unhook the spring on the side of the metal box.
-
-
-
Unscrew the 10mm screw attaching the metal plate to the printer.
-
-
-
Lift the transformer out of the printer.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0