crwdns2915892:0crwdne2915892:0
This replacement guide shows how to remove the camera's LCD screen. The back panel must be removed before hand.
crwdns2942213:0crwdne2942213:0
-
-
Squeeze the eyepiece between your index finger and thumb and lift up and off.
-
-
-
Using the PH000 screwdriver head, remove the four 4 mm screws on the bottom of the camera.
-
-
-
Using the PH000 screwdriver head, remove the two 3mm screws on the right side of the camera (from the LCD screen).
-
-
-
-
Using the PH000 screwdriver, remove the four 4mm screws behind the eyepiece.
-
-
-
Using the PH000 screwdriver head, remove one 4 mm screw on the left side of the camera (from the LCD screen).
-
-
-
Remove the side panel by lifting off with fingers.
-
-
-
Using the PH00 screwdriver head, unscrew four 4 mm screws and one 2 mm screw
-
-
-
Remove the metal plate covering inside of the LCD screen
-
-
-
Carefully disconnect the circuitry sheets from the white plastic bases
-
-
-
Using the plastic spudger, carefully pry out the LCD screen from the back panel
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
Cal Poly, Team 22-10, Maness Winter 2017 crwdns2935289:0Cal Poly, Team 22-10, Maness Winter 2017crwdne2935289:0
CPSU-MANESS-W17S22G10
crwdns2931471:04crwdne2931471:0
crwdns2935297:010crwdne2935297:0
