crwdns2915892:0crwdne2915892:0
This is a necessary procedure for replacing the parts of the lens mount of the Canon EOS Rebel XS 35mm camera, which is located on the front of the camera. These parts include a flimsy, brass-colored layer and a silver layer. Both of these layers fit inside of the ring on the front of the camera in a specific way.
crwdns2942213:0crwdne2942213:0
-
-
Using a PH000 screwdriver bit, remove the 2 black screws circled in the picture, which are both 6 mm in length and 1.25 mm in diameter.
-
-
-
Using a PH000 screwdriver bit, remove the 5 black screws circled in the picture, which are all 5.5 mm in length and 2 mm in diameter.
-
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Simply using your fingers - although you can use something else such as tweezers - remove the first layer of the lens mount. This first layer is black, plastic, has a red dot at the top, and so on.
-
-
-
Using (preferably) tweezers - although you can also use your fingers - remove the flimsy brass-colored layer of the lens mount.
-
-
-
Using (preferably) tweezers - although you can also use your fingers - remove the silver layer of the lens mount.
-
To reassemble your device, follow these instructions in reverse order.
Reassembly can be a lot harder than disassembly for this part of the camera, which accounts for the large range in estimated time.
To reassemble your device, follow these instructions in reverse order.
Reassembly can be a lot harder than disassembly for this part of the camera, which accounts for the large range in estimated time.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
