crwdns2942213:0crwdne2942213:0
-
-
Remove the two 7mm philips screws from the front casing.
-
-
-
Remove the three 1/8" philips screws from the bottom.
-
Remove the single 3/16" philips screw from the bottom.
-
-
-
-
Remove the two 1/8" philip screws from the right side of the front casing.
-
-
-
Locate the lock of the battery door and pull it for allowing the door to be removed.
-
Remove the battery door.
-
-
-
Remove the two 1/8" philips screws from the hinge mount.
-
Take out the door hinge mount.
-
-
-
Remove the screw holding the black cap which covers access holes to the screws holding the front casing to the battery compartment.
-
Remove the black cap pulling it to the right.
-
Remove the two 3/16" philips screws.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
