crwdns2915892:0crwdne2915892:0
This guide will show you how to access, remove, and replace the LCD screen. The process is safe and uncomplicated.
crwdns2942213:0crwdne2942213:0
-
-
Remove the two 4.8 mm black screws above the lens on the front of the camera.
-
-
-
Remove the 4.3 mm black screw under the lens ring, and the 4.8 mm black screw under the camera.
-
-
-
Remove the 4.8 mm black screw on the left side of the camera.
-
-
-
Remove the front panel by lifting it away from the camera's body.
-
-
-
-
Slide the outer eyepiece upward to remove it.
-
-
-
Remove the two 4.75 mm black screws located on the top of the camera.
-
-
-
Remove the four 4.3 mm black screws near the bottom corners of the eyepiece at the back of the camera.
-
-
-
Slowly separate the top panel from the camera by pushing it upward.
-
-
-
To unclip gold connector push the edge up and away from the lcd screen. A plastic opening tool is recommended.
-
The gold connector can fall into the camera, but it will remain attached and can be pulled back up.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0
crwdns2915084:0crwdne2915084:0
Cal Poly, Team 8-8, Regan Spring 2011 crwdns2935289:0Cal Poly, Team 8-8, Regan Spring 2011crwdne2935289:0
CPSU-REGAN-S11S8G8
crwdns2931471:05crwdne2931471:0
crwdns2935297:022crwdne2935297:0
crwdns2947412:02crwdne2947412:0
Thank's , your tutorial nice ... gracias
Where do you find replacement lcd screen if the one on the camera is cracked?
