crwdns2915892:0crwdne2915892:0
In this guide, you will learn how to replace the main board in the EF-S 18-135mm lens. The main board is crucial to the correct operation of the lens, passing focus commands from the camera to the lens.
crwdns2942213:0crwdne2942213:0
-
-
First, detach the lens by pressing and holding the release button highlighted in the picture.
-
Next, grab the lens and rotate it counter-clockwise when looking at the camera.
-
Finally, when the camera stops rotating, pull the lens away from the camera.
-
-
-
Remove the four 5.5mm JIS #000 screws for the lens mount ring (silver ring).
-
Remove the two 4mm JIS #000 screws mounting the main board connector.
-
-
-
-
Using a spudger, pull the connector loose from the barrel switch ring assembly.
-
Set barrel switch ring assembly to the side.
-
-
-
Using a spudger, pull the five connectors out of their housing.
-
-
-
Remove the two 4mm JIS #000 main board mounting screws.
-
Remove the main board from the lens with your hand.
-
The main board is now successfully removed from the lens.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
University of Memphis, Team S2-G5, Kim Spring 2018 crwdns2935289:0University of Memphis, Team S2-G5, Kim Spring 2018crwdne2935289:0
UM-KIM-S18S2G5
crwdns2931471:03crwdne2931471:0
crwdns2935297:012crwdne2935297:0
