crwdns2915892:0crwdne2915892:0
This guide will show you how to replace the motherboard in the CRKD NEO S CK24NS controller.
Be sure to power off and disconnect the controller from any power source before beginning this procedure.
crwdns2942213:0crwdne2942213:0
-
-
Turn the CRKD NEO S CK24NS upside down with the front-facing buttons facing downward.
-
-
-
-
Use a 1.5 mm Hex screwdriver to remove the eight 1.5 mm Hex screws from the back of the controller.
-
Carefully lift off the back panel and set it aside.
-
-
-
Remove the four 2.5 mm screws holding the motherboard in place using a Phillips #0 screwdriver.
-
Take out the white plastic pieces connected to the motherboard with tweezers.
-
Gently lift the motherboard and set it aside.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.