crwdns2915892:0crwdne2915892:0
The CHUWI Gemibook XPro does not feature dynamic speakers as they may underperform if you are seeking audio quality in your business work. This easy-to-follow guide will help you for your speaker replacement or upgrade. This guide will require pointed tweezers and a Phillips 1 bit screwdriver.
crwdns2942213:0crwdne2942213:0
-
-
Peel off the black tape on the upper-right side of the motherboard.
-
-
-
Use two opening tools or your fingernails to carefully "walk" the battery connector out of its socket.
-
-
-
Unseat the speaker wires and antenna wire from their retaining hooks on the battery with a halberd spudger.
-
-
-
-
Use a Phillips #1 screwdriver to remove the five 4.3 mm screws that secure the battery.
-
-
-
Lift the battery up and out of the chassis.
-
-
-
Use tweezers or your fingernails to gently disconnect the speaker connector.
-
-
-
Use a Phillips #1 screwdriver to remove the four 4.2 mm screws that secure the speakers (two screws on each speaker).
-
-
-
Gently pick up and remove both speakers. Be careful not to strain the wire connecting them.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
University of North Texas, Team 5-1, Kilpatrick Fall 2024 crwdns2935289:0University of North Texas, Team 5-1, Kilpatrick Fall 2024crwdne2935289:0
UNT-KILPATRICK-F24S5G1
crwdns2931471:04crwdne2931471:0
crwdns2935297:05crwdne2935297:0
