crwdns2915892:0crwdne2915892:0
In order to switch the stitching styles of your sewing machine, the stitch select knob must be properly functioning. This guide will show the steps for replacement.
crwdns2942213:0crwdne2942213:0
-
-
Place the machine on a solid surface.
-
Remove the 14mm Phillips #2 screw holding on the face cover.
-
-
-
Remove the two 14mm Phillips #2 screws and two 22mm Phillips #2 screws that secure the rear casing.
-
-
-
Lay the machine on its side.
-
Remove the four 10mm Phillips #2 screws that hold the bottom panel in place.
-
-
-
-
Place the machine upright.
-
Remove the rear casing.
-
-
-
Adjust the knob to gain access to the phillips head screw.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0