crwdns2915892:0crwdne2915892:0
If your Brother HL-L2400D printer produces faded prints, streaks, or error messages indicating that the drum needs replacement, it’s time for a new drum unit. The drum is a critical component that transfers toner onto paper; over time, it wears out and affects print quality.
This guide will walk you through the step-by-step process of replacing the drum in your Brother HL-L2400D, ensuring smooth operation and high-quality prints. Whether you’re a beginner or experienced with printer maintenance, our instructions will make the process quick and hassle-free.
Let’s get started!
-
-
Open the front cover of the printer.
-
-
-
Grab the green tab and pull the part out.
-
-
-
Place the drum onto a sheet of paper.
-
Press the green tab on the side to pop out the inside component.
-
-
-
-
Press the green tab firmly until you hear a noise.
-
Pull out the drum using the closest grey part to you.
-
-
-
Place your new replacement drum inside.
-
Press the new drum firmly.
-
-
-
To clean the imaging of the drum, use the slider above.
-
Make sure to go back and forth with the slider several times.
-
-
-
Place your replaced part back into the printer.
-
Press and hold the "Go" button at the bottom of the printer.
-
Let go once all four of the button's LEDs are lit up.
-
You have successfully replaced the drum! Contact a local recycling centre or a specialized recycling service for instructions on properly disposing of the cartridge or drum unit.
You have successfully replaced the drum! Contact a local recycling centre or a specialized recycling service for instructions on properly disposing of the cartridge or drum unit.
crwdns2935221:0crwdne2935221:0
crwdns2935229:03crwdne2935229:0
crwdns2915084:0crwdne2915084:0
York University, Team 2-11, Woodhouse Spring 2025 crwdns2935289:0York University, Team 2-11, Woodhouse Spring 2025crwdne2935289:0
YORK-WOODHOUSE-S25S2G11
crwdns2934841:01crwdne2934841:0
crwdns2935303:01crwdne2935303:0
