crwdns2915892:0crwdne2915892:0
This guide will show how to remove and replace the power wire in a Brentwood TS-292B toaster.
crwdns2942213:0crwdne2942213:0
- 
   
   - 
                     
            Remove the five 6mm screws on the bottom of the toaster with a Phillips #2 screw driver. 
 
- 
                     
            
- 
   
   - 
                     
            To remove the toasting lever, pull the lever away from the toaster. 
 
- 
                     
            
- 
                     
                                                
- 
   
   - 
                     
            Unplug the wire connecting the casing to the circuit board to fully remove the toaster casing. 
 
- 
                     
            
- 
   
   - 
                     
            Unscrew the wire bracket with a Phillips #2 screw driver. 
 
- 
                     
            
- 
   
   - 
                     
            Pull back on the black tab that is holding the circuit board in place. 
- 
                     
            While pulling the tab back, lift up on the circuit board. 
 
- 
                     
            
- 
   
   - 
                     
            Desolder the power wire connections on the circuit board. 
 
- 
                     
            
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
