crwdns2915892:0crwdne2915892:0
It is possible, though honestly rare, for the motor of a trimmer to fail for one reason or another. If changing the batteries does not restore functionality for this model, trying to replace the motor would be the next step.
crwdns2942213:0crwdne2942213:0
-
-
Remove any attached trimmer heads by gripping and pulling away from the body.
-
-
-
Insert an opening pick between the top plate and the grey separator.
-
Slide the opening pick around the perimeter of the plate to release the hidden clips.
-
-
-
Remove the four 7mm Torx T6 screws attaching the grey plastic frame to the black plastic casing.
-
-
-
-
Use the opening pick to lift the grey frame from the black casing.
-
-
-
Remove the circuit board assembly from the frame.
-
-
-
Pull the small black plastic piece out of the frame.
-
-
-
Desolder the wires attached to the motor.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:03crwdne2935229:0