crwdns2915892:0crwdne2915892:0
Screens often fail or stop displaying properly. Use this guide to remove and replace the screen assembly.
crwdns2942213:0crwdne2942213:0
-
-
Remove the four 19mm Phillips #2 screws from the base of the device.
-
-
-
Turn the device over, holding the base on with your thumbs.
-
-
-
Gently lift the top off of the device.
-
-
-
Pinch and unplug the white connector from the device.
-
-
-
Gently pinch and pull on the white ribbon cable to disconnect it from the base.
-
-
-
-
The base should now be completely detached from the device.
-
-
-
Wedge the spudger between the top and front panel on the right side of the device.
-
Push down on the spudger, lifting the front panel away from the top panel until it pops out of the right side.
-
Repeat for the left side of the device.
-
-
-
Once the panel is released on the left side, wedge the spudger between the top panel and front grill of the device as shown.
-
Apply pressure and move the spudger upward until the front grill pops out.
-
Repeat for the right side of the device.
-
-
-
Lift the front grill away from the device.
-
-
-
Turn the device around.
-
Wedge the spudger into the larger part of the gap under the back of the device.
-
-
-
Move the spudger up until the button panel is loose.
-
Push forward on the back of the button panel to disconnect the panel from the top of the device.
-
-
-
Turn the device around.
-
Pull the button panel forward with one hand and push the screen assembly into the device with the other to disconnect the button panel.
-
-
-
Gently pull the top of the screen assembly away from the device.
-
-
-
Lift the screen assembly upward and pull the white wire strip out of the device.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:04crwdne2935229:0
crwdns2915084:0crwdne2915084:0
Cal Poly, Team S15-G2, Banghart Spring 2017 crwdns2935289:0Cal Poly, Team S15-G2, Banghart Spring 2017crwdne2935289:0
CPSU-BANGHART-S17S15G2
crwdns2931471:04crwdne2931471:0
crwdns2935297:06crwdne2935297:0
crwdns2947412:05crwdne2947412:0
Great! This device is the best wave system in sound accurate. All frequencies sounds clear!!! Awesome!!!
Nicely done. Love the details. Just one question - where can I get the replacement screen?
Instructions were PERFECT! Thank you. I found my replacement screen on ebay for $25, took a chance that it would work as stated by the seller. Otherwise I would have thrown the radio away.
I performed the repair as directed. It was easy especially if you have a plastic spung to work with. Problem comes from the new display once installed shows all the characters? Unplugged it and re-plugged but still stuck in all character test mode?
How to purchase White wire strip
