crwdns2915892:0crwdne2915892:0
This tutorial requires removal of the front grille and back cover to access the speakers.
crwdns2942213:0crwdne2942213:0
-
-
Remove the two T-10 machine screws at the bottom of the device.
-
-
-
Turn the device around.
-
From the top, lightly push down the back cover to release it.
-
Lift the bottom of the cover and pull it up.
-
-
-
Remove the two T-10 machine screws, then pull the battery straight out.
-
-
-
-
Remove the two screws holding the speaker grille in place.
-
-
-
Grip the sides of the device and push the speaker grille down and out.
-
-
-
Gently release the ribbon from its connector and remove the grille.
-
-
-
There are four T-10 Torx screws for each speaker; remove all four screws for each speaker you are replacing.
-
-
-
Using a plastic pry tool, carefully pry the speaker up.
-
With the bottom of the speaker exposed, unwind the wires from the connection tabs and replace the speaker.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0