crwdns2915892:0crwdne2915892:0
A diffuser's fan and battery are common faults in a diffuser breaking down. The fan keeps the internals of the device, like the motherboard, from overheating. In this guide, we replace a fan from a Blossom Ultrasonic Essential Oil Diffuser ARM-510GY.
Before disassembling the diffuser, make sure there is no oil or water left in the diffuser and make sure the diffuser is unplugged.
crwdns2942213:0crwdne2942213:0
-
-
Use a Phillips #2 screwdriver to remove the four 8 mm screws on the bottom of the diffuser.
-
-
-
Lift the ceramic top of the oil diffuser.
-
Then lift off the plastic top off the diffuser.
-
-
-
-
Gently unplug the cord from the circuit board.
-
Place the plastic lid somewhere safe on the a flat surface.
-
-
-
Remove the plastic ring and place somewhere safe on a flat surface.
-
-
-
Remove two Truss head 4 mm screws with a Phillips #2 screwdriver and place safely nearby.
-
-
-
Gently lift the circuit board onto it's side
-
-
-
Unplug the white connector.
-
There are four #M1 6 mm Phillips pan head screws holding down the fan.
-
-
-
Remove the #M1 6 mm screws with a Phillips #2 screwdriver while holding down the fan.
-
Gently lift the fan and place the fan someplace safe on the flat surface.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
York University, Team R-17, Melo-Thaiss Winter 2022 crwdns2935289:0York University, Team R-17, Melo-Thaiss Winter 2022crwdne2935289:0
YORK-MELO-THAISS-W22SRG17
crwdns2934841:01crwdne2934841:0
crwdns2935297:02crwdne2935297:0
