crwdns2915892:0crwdne2915892:0
This Speaker Replacement guide was written to help consumers fix their device as easy as possible. The steps show the steps required to replace the speaker.
crwdns2942213:0crwdne2942213:0
-
-
Place your Blackberry face down in front of you.
-
-
-
Locate the indent on the bottom of the back cover.
-
Use your fingernail to lift and remove the back cover.
-
-
-
From the top, use your fingernail to lift and remove the battery.
-
-
-
Use the T6 Torx screwdriver to unscrew the two 5mm screws highlighted.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Place the phone face up and use tweezers to securely grip and lift the screen upwards.
-
-
-
Use a plastic opening tool to lift the bottom edge of the front cover.
-
-
-
-
Use your nails to unclip the sides of the frame from the phone.
-
-
-
Locate and remove the two 5mm screws on top of the keyboard base with a T6 Torx screwdriver.
-
-
-
Carefully pull keyboard base up and away from phone.
-
Disconnect keyboard base from phone completely.
-
-
-
Remove the four 5mm screws on the top and bottom of phone with a T6 Torx screwdriver
-
-
-
Using a prying tool, find the crease below the screen.
-
Insert where shown and use the tool to unclip the two sides of screen from body.
-
-
-
From the back of the phone, use your finger to push the front piece of the phone away from the back piece.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Insert tweezers into the small holes on the top of the speaker.
-
-
-
Lift the speaker up to remove the speaker from phone.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:06crwdne2935229:0