crwdns2915892:0crwdne2915892:0
Replace your cracked LCD screen with a new one.
crwdns2942213:0crwdne2942213:0
-
-
Remove the battery cover by applying pressure and sliding the silver square on the back of the phone downwards.
-
-
-
Remove the battery by prying under it with your finger or a plastic opening tool.
-
Remove the four small 3/8" long screws using a 1/16" diameter torx screwdriver.
-
-
-
Carefully remove the two plastic side bars using a nylon spudger.
-
-
-
Carefully pry the back casing off with a nylon spudger.
-
-
-
After disassembling the outer casing, the phone should be stripped as shown.
-
-
-
At the top of the phone, locate the gloss SATA cable strap connecting the LCD screen to the phone.
-
Using the prying tool, disconnect the SATA cable by levering under the connector.
-
-
-
Using a spudger, pry up the old screen as shown.
-
-
-
Insert the new LCD screen.
-
Attach the cable to the connector located at the top of the phone.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
Cal Poly, Team 13-64, Johann Spring 2013 crwdns2935289:0Cal Poly, Team 13-64, Johann Spring 2013crwdne2935289:0
CPSU-JOHANN-S13S13G64
crwdns2931471:04crwdne2931471:0
crwdns2935297:07crwdne2935297:0
