crwdns2915892:0crwdne2915892:0
This guide shows you how to remove both the battery housing and the speaker.
crwdns2942213:0crwdne2942213:0
-
-
Turn over your BalckBerry 7100g so that the back cover is facing up.
-
Locate the battery cover release button near the bottom of the back panel.
-
-
-
Push down on the release button with one thumb.
-
Slide the battery cover off with the other thumb.
-
-
-
Remove the battery from the battery housing by flipping up the top of the battery.
-
-
-
-
Locate the silver strip near the top of your BlackBerry.
-
Use a plastic opening tool to pry off the edge of the silver lining.
-
Slide the tool along the length of the silver strip to completely remove it.
-
-
-
Locate and unscrew the four (4) screws using a T6 screwdriver.
-
-
-
Tightly pinch the top of the front and back halves of the housing.
-
Carefully pry the two halves of the housing apart.
-
-
-
You can now easily remove the "guts" of the phone from the housing.
-
-
-
Turn over the motherboard so that the speaker is facing up.
-
Locate and unscrew the four (4) screws near the bottom of the motherboard, using a T6 screwdriver.
-
-
-
Do NOT get rid of the terminal if replacing the battery housing and/or the speaker.
-
The terminal will slide out of the housing.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0