crwdns2915892:0crwdne2915892:0
If the saw has a broken shoe plate, this guide will show you how to replace it. It is simply two screws that must be removed in order to remove the entire plate.
crwdns2942213:0crwdne2942213:0
-
-
Remove the nine torx 15.875mm screws on the front of the jigsaw using a T-15 torx screwdriver.
-
-
-
By separating the two housing halves, carefully remove the top plate.
-
-
-
-
Remove the 6.3mm hex screw on the left with a H.30 hex screwdriver.
-
Remove the reverse threaded 6.9mm black hex screw on the right with a H.40 hex screwdriver.
-
-
-
Simply remove the shoe plate by pulling it down and out.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0
crwdns2947410:01crwdne2947410:0
Thank you! Looked all over for this.