crwdns2915892:0crwdne2915892:0
This guide shows the owner how to replace the power cord on their jig saw if it is cut or damaged. It is a very common way to render the saw useless. luckily the fix is quite easy.
crwdns2942213:0crwdne2942213:0
-
-
Remove the nine torx 15.875mm screws on the front of the jigsaw using a T-15 torx screwdriver.
-
-
-
By separating the two housing halves, carefully remove the top plate.
-
-
-
-
Remove the two 12.7mm phillips head screws holding the power cord in place with a PH2 Phillips head screwdriver.
-
-
-
Remove the two 6.35mm flat head screws on the trigger with a 2.5 flat head screwdriver to disconnect the white and black cords.
-
-
-
Gently remove the black and white cord from the trigger assembly.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
Cal Poly, Team 22-9, Maness Winter 2017 crwdns2935289:0Cal Poly, Team 22-9, Maness Winter 2017crwdne2935289:0
CPSU-MANESS-W17S22G9
crwdns2931471:04crwdne2931471:0
crwdns2935297:07crwdne2935297:0
