crwdns2915892:0crwdne2915892:0
This guide will help you replace the gear in your Beyblade Burst Cord Launcher.
crwdns2942213:0crwdne2942213:0
-
-
Here is all the materials you need. The launcher needed the replacement of a gear and a gear and a screwdriver to gain access to the Broken gear.
-
-
-
Unscrew the screw that located on the launcher. The screws are placed within the divots.
-
-
-
-
Gently separate the two halves open the launcher and locate the problem gear.
-
-
-
Remove old gear and replace it with the new gear. Make sure the gears line up by spinning the top gear and watching to make sure the second gear also moves.
-
-
-
Put the two pieces back together. I recommend putting the gear side down and putting the top side on top to ensure no movement from the gear. Once you but the two haves together flip the launcher on its back and get ready to put back the screws.
-
-
-
Screw each screw back into each hole. After making sure the launcher is held tightly together launch a beyblade to ensure the launcher and gear is working properly.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
Duquesne University, Team 4-4, Luchini Spring 2025 crwdns2935289:0Duquesne University, Team 4-4, Luchini Spring 2025crwdne2935289:0
DUQ-LUCHINI-S25S4G4
crwdns2934841:01crwdne2934841:0
crwdns2935303:01crwdne2935303:0
