crwdns2915892:0crwdne2915892:0
If the glass door breaks, becomes damaged, or is too dirty for your liking, this easy and effective guide will walk you through the steps required to replace it.
crwdns2942213:0crwdne2942213:0
-
-
Remove five 11.6 mm Phillips #2 screws from the rear of the device.
-
-
-
Open the front glass door of the toaster oven.
-
-
-
Locate retaining screw on the upper-middle portion of the door frame.
-
-
-
Remove one 21.9 mm Phillips #2 retaining screw from upper-middle portion of door frame.
-
-
-
-
Flip toaster onto back panel with feet facing forward.
-
-
-
Use spudger to pry the grey rubber inserts from the black plastic feet.
-
-
-
Remove four 13.7mm Phillips #2 screws from black plastic feet to separate the cover from the device.
-
-
-
Lift the black outer cover off of the toaster
-
-
-
Unhook the black coil springs from back of the toaster on both sides of the device.
-
-
-
Use the black spudger to gently depress the hinge prongs on the bottom of the door.
-
-
-
Gently slide door away from the device, removing it from the device.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
Appalachian State University, Team S1-G4, Menagarishvili Spring 2019 crwdns2935289:0Appalachian State University, Team S1-G4, Menagarishvili Spring 2019crwdne2935289:0
APSU-MENAGARISHVILI-S19S1G4
crwdns2931471:03crwdne2931471:0
crwdns2935297:05crwdne2935297:0
