crwdns2915892:0crwdne2915892:0
Use this guide to replace the battery in your Beats Studio3 Wireless headphones (model number: A1914).
The battery helps the Beats Studio3 Wireless headphones to power on. It's designed for long battery life of up to 22 hours for all-day. A failed battery will cause your Beats Studio3 Wireless to not turn on. You can take a look at the bottom right ear pad to check if the five lights are on. In some cases, your Beats Studio3 Wireless will have faulty charging due to a deteriorated battery.
crwdns2942213:0crwdne2942213:0
-
-
Use a pointed nylon spudger to remove the center circular panel on the right side of your device.
-
-
-
Remove the four 3.5 mm screws using a Phillips #0 screwdriver.
-
-
-
-
Using a pointed nylon spudger, remove the tab located on the inner part of the headband labeled "R."
-
Place the nylon spudger in between the side panels and push inward going from bottom to top to separate both sides of the panel.
-
-
-
Place the nylon spudger underneath the battery, push inward and separate the battery from the inside.
-
-
-
Use a nylon spudger to lift up the glue sticking the wires down.
-
Use a nylon spudger to lift the connector to disconnect the battery.
the glue on the connector was a nightmare in my headset. Used a soldering iron to weaken the glue as described in a youtube video i found, but it worked out in the end :)
Me too. I watched 1 YouTube video and he just pulled the connector loose with no mention of glue. When I pulled on wires it i stripped the wires good. I the wires minus the connector buried in glue on the board.
I watched a 2nd video and then learned about the glue.
I'm heating up my soldering iron now. There a bundle of wires a little too close but i think i will w5rap them it aluminum foil to beside. I miss myBEATS Studio3 headphones. But now i know how to fix them. I bought them off Amazon on:
Nov 22, 2022 so today is Aug 13, 20241 years 8 months 22 days
or 20 months 22 days
or 90 weeks 0 days
or 630 calendar daysNot sure how this compares with others out there but i will compare it against my new battery.
They claim it has more whatever... i think Amazon got me again... no reviews $1580... but it has 760mAh!!
Here's theAmazon hype:
[2024 New upgraded] Ultra High Capacity 760mAh Li-Polymer Replacement Battery for Beats Studio 2.0, Studio 3.0, Solo pro,Wireless Headphones with Professional Replacement Tool Kits
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:06crwdne2935229:0
crwdns2915084:0crwdne2915084:0
UMass Dartmouth, Team 7-4, Ryckebusch Spring 2023 crwdns2935289:0UMass Dartmouth, Team 7-4, Ryckebusch Spring 2023crwdne2935289:0
UMASSD-RYCKEBUSCH-S23S7G4
crwdns2931471:03crwdne2931471:0
crwdns2935297:06crwdne2935297:0
crwdns2947412:04crwdne2947412:0
Should the glue be reapplied or is it okay to simply place back on?
the replacement batteries usually come with a gluepad on the back.
The connector its up to you - you risk the chance of the connector coming lose and u have to reopen the headset. But ill take the chance for now, lets see how it holds up without new glue.
seb -
Tengo una duda mis audífonos la batería esta full de voltaje pero me marca un rojo y no me prenden q podría ser o que solución podría darle
My beats studio 3 proplem was it plink whit when i connect it with the charger, but when i press to start it it blinks full red .
My Qus is .. is the battery are dameged ..?!
