crwdns2915892:0crwdne2915892:0
Prereq to removing the battery assembly or the individual battery cells.
crwdns2942213:0crwdne2942213:0
-
-
Pull the left edge of the front bezel away from the device to release the plastic clip.
-
-
-
Continue pulling the left edge of the front bezel away from the device until the right clip releases.
-
Remove the front bezel.
-
-
-
Use the cutout in the battery connector to pull it toward the right edge of the device and disconnect it.
-
-
-
-
Lift and rotate the battery connector to move it out of the way of the battery assembly.
-
-
-
Use a Phillips driver to remove the three 23 mm‑long screws securing the battery assembly.
-
-
-
Pull the battery assembly out of the housing until it stops at its first plastic tab.
-
-
-
Depress the plastic tab while pulling on the battery assembly until it clears the tab.
-
-
-
Continue pulling the battery assembly out of the housing until it stops at its second plastic tab.
-
-
-
Depress the plastic tab while pulling on the battery assembly until it’s free from the housing.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
