crwdns2915892:0crwdne2915892:0
This is a prerequisite-only guide! This guide is part of another procedure and isn't meant to be used alone.
crwdns2942213:0crwdne2942213:0
-
-
Use a Phillips screwdriver to remove the 10 screws securing the lower case:
-
Six 12 mm screws
-
Four 4.5 mm screws
-
-
-
Insert an opening pick between the lower case and the chassis on the front right edge.
-
-
-
-
Slide the pick along the front edge to release the clips securing the lower case.
-
Continue sliding the opening pick along the left and right edges to release the remaining clips.
-
-
-
Lift the lower case from the chassis and remove it.
-
-
-
Use the pointed end of a spudger to push each side of the battery connector until it comes out of the socket.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
