crwdns2915892:0crwdne2915892:0
This guide will show you how to remove the top cover using a hex 2.0 head driver in order to access the modem and attached microSD card. With a pair of tweezers, you will be able to remove and replace the microSD card.
crwdns2942213:0crwdne2942213:0
-
-
Place the face of the device showing BRCK face up.
-
-
-
Remove the four screws(4mm hex head) on the corners of the device with a Hex 2.0 Screwdriver.
-
-
-
-
Cut the black zip tie holding the modem down.
-
-
-
Remove the connection located on the edge of the modem.
-
-
-
Slightly lift the modem to reveal the brown ribbon connector and metal connection plate, located on the bottom of the modem.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Using your tweezers, gently push on the metal plate and slide it down toward the base of the modem to release the locking mechanism.
-
Lower the plate and gently pull the ribbon out of the face plate.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
With your tweezers, slide the metal face plate to release the locking mechanism.
-
Lift the face plate and carefully remove the microSD card.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2947410:01crwdne2947410:0
Can my brck connect if it does not have the sim card and the SD card from the manufacturer?