crwdns2915892:0crwdne2915892:0
In order to replace the vibration motor the user will need to have knowledge on soldering station usage. The battery does not have to be removed if the user is able to access the solder connections without damaging the battery. A larger tip on the soldering iron is more ideal in order to more quickly heat the solder without damaging the board.
crwdns2942213:0crwdne2942213:0
-
-
Remove the back case using plastic opening tool.
-
-
-
Remove the seven 4mm Phillips #000 screws.
-
Remove the top plate.
-
-
-
-
Detach the battery from the mother board using a plastic opening tool.
-
Use a plastic spudger to remove battery.
-
-
-
Remove the five 4 mm JIS J000 screws from bottom plate
-
Using a soldering iron, simultaneously heat the two soldered connections for the motor
-
When the connection is melted, use a set of tweezers to safely remove the motor
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0
crwdns2915084:0crwdne2915084:0
USF Tampa, Team 12-2, Eyestone Spring 2016 crwdns2935289:0USF Tampa, Team 12-2, Eyestone Spring 2016crwdne2935289:0
USFT-EYESTONE-S16S12G2
crwdns2931471:03crwdne2931471:0
crwdns2935297:05crwdne2935297:0
