crwdns2915892:0crwdne2915892:0
Screens on these phones can crack easily, using this guide you can have a clean brand new slick look again! It is also a nice way to get under the screen and remove dust particles.
crwdns2942213:0crwdne2942213:0
-
-
Using a plastic opening tool, pry open the back cover from the slit on the bottom right corner of the phone.
-
-
-
Using a plastic opening tool or finger, pull out the battery.
-
-
-
Remove the four 4.0mm Phillips #1 screws.
-
-
-
Starting from a corner, separate the panel from the frame using the plastic opening tool.
-
-
-
-
Unscrew the 3.6mm Phillips #0 screw from the motherboard.
-
-
-
Using a spudger, lift the black ZIF connector at the top left corner of the phone.
-
-
-
Pull the ribbon cable out of the ZIF connector.
-
-
-
When the ribbon cable is removed from the ZIF connector, peel off the power, sticky button using a plastic opening tool.
-
-
-
Separate the screen cover from the motherboard using the plastic opening tool. And don't forget that your phone can mess up if u separate the motherboard from the screen cover
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:05crwdne2935229:0