crwdns2915892:0crwdne2915892:0
Is your trackpad not responding to touch? Are the buttons on your trackpad malfunctioning? Replacing your trackpad may help address these issues.
crwdns2942213:0crwdne2942213:0
-
-
Turn over laptop and remove the battery for ease of replacement.
-
-
-
Use a Phillips Head #1 screwdriver to unscrew the eight 3mm screws.
-
Use a Phillips head #1 screwdriver to unscrew the two 4mm screws.
-
-
-
Use a plastic spudger to pry off the front cover of the keyboard.
-
-
-
Removing the white wiring from the trackpad.
-
Continue removing the wire until you get to the end.
-
Fold up the latch on the where the cable meets the motherboard.
-
-
-
-
Use a spudger to lift the ZIF connector tabs up.
-
Remove the black and the white ribbon cable.
-
Remove the entire keyboard covering.
-
-
-
Lay the keyboard cover down with the keys facing down. This component contains the track pad. You will be working with this component until you reassemble.
-
-
-
Begin peeling up the clear tape located on top of the band aid seal.
-
-
crwdns2935267:0crwdne2935267:0Magnetic Project Mat$19.95
-
Using a PH0 Phillips Screwdriver, remove the two screws located within the circles of the band aid seal.
-
-
-
Begin peeling back the band aid tape. Use the plastic spudger if necessary. This will allow you to free up the trackpad.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0