crwdns2915892:0crwdne2915892:0
Replacing a CD/DVD drive may need to take place when the drive simply fails to perform its normal functions. It has built up too much debris/dust, or the drive itself may have no power due to broken internal mechanisms and parts. Replacing the drive may resolve issues with lag and lack of smooth audio/visuals so the CD/DVD can run smoothly for anyone wanting to enjoy media, or burn a CD.
Before beginning, unplug the laptop and make sure it is completely off.
The battery and hard drive will need to be removed before replacing the CD/DVD drive on the last step.
crwdns2942213:0crwdne2942213:0
-
-
Place the computer upside down.
-
Using your thumbs, slide both latches away from each other (towards the outside).
-
Push the battery out with your fingers.
-
-
-
Remove the two screws using a Phillips #0 screwdriver.
-
-
-
-
Pry open the case using an iFixit opening tool.
-
-
-
The highlighted area is where your hard drive would be. Slide it out away from its slot and pull it gently to remove.
-
-
-
Remove the screw from the bottom right corner using a Phillips #0 screwdriver.
-
Insert a spudger into the hole to carefully push the CD/DVD drive out.
-
To reassemble your device, just push the new CD/DVD driver back. Then put the components back together then put the screws back in.
To reassemble your device, just push the new CD/DVD driver back. Then put the components back together then put the screws back in.
crwdns2915084:0crwdne2915084:0
Cal Poly, Team 2-9, Johann Summer 2010 crwdns2935289:0Cal Poly, Team 2-9, Johann Summer 2010crwdne2935289:0
CPSU-JOHANN-R10S2G9
crwdns2931471:05crwdne2931471:0
crwdns2935297:010crwdne2935297:0
