crwdns2915892:0crwdne2915892:0
Use this guide to replace the hard drive in your device.
crwdns2942213:0crwdne2942213:0
-
-
Lift up the rubber tab located in the upper-right corner of the backing plate.
-
-
-
Use a Phillips #1 screwdriver to remove the 5.2 mm screw behind the rubber tap.
-
-
-
-
Carefully pull the backing plate off. If you have a pry tool, you can pry on the edges carefully.
-
-
-
Use a Phillips head screwdriver to remove the four 2.4 mm screws from the hard drive mount.
-
Remove the hard drive from the device.
-
crwdns2935219:0crwdne2935219:0
To reassemble your device, follow these instructions in reverse order.
crwdns2915888:0crwdne2915888:0
To reassemble your device, follow these instructions in reverse order.