crwdns2915892:0crwdne2915892:0
Prerequisite-only guide to remove the RAM door.
crwdns2942213:0crwdne2942213:0
-
-
Use an opening tool to pry up the small rubber cover on the upper right corner of the RAM access door.
-
-
-
Remove the 5.3 mm Phillips #00 screw securing the RAM access door.
-
-
-
-
Insert the point of an opening pick in the seam near the top right corner of the RAM access door and gently pry the door up slightly.
-
The door is held in place by small clips around its edges. Pry until you feel the nearest clips release.
-
-
-
Insert the wide edge of an opening pick into a new part of the seam between the door and the computer.
-
Pry the door up to release the clips closest to the pick.
-
Continue to slide the pick along the seam all the way around the door, prying as you go, until all the clips holding the door down have been released.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
