crwdns2915892:0crwdne2915892:0
This prerequisite is required in order to replace or fix some components inside the bottom of the computer.
crwdns2942213:0crwdne2942213:0
-
-
Unscrew the eight bottom cover screws (one of them is under the hand) using a screwdriver with a J1000 tip.
-
Unscrew the middle screw towards the top of the device using a screwdriver with a T5 tip.
-
-
-
Use the plastic opening tool to remove the four bottom rubber feet.
-
-
-
-
Unscrew the four screws under the feet using a screwdriver with a J100 tip.
-
-
-
Use the plastic opening tool to pry up the palm rest assembly.
-
-
-
Disconnect the two cables from the motherboard with tweezers
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:011crwdne2935229:0
crwdns2915084:0crwdne2915084:0
Eastern Washington University, Team 1-1, Rowley SU 2016 crwdns2935289:0Eastern Washington University, Team 1-1, Rowley SU 2016crwdne2935289:0
EWU-ROWLEY-SU16S1G1
crwdns2931471:03crwdne2931471:0
crwdns2935297:04crwdne2935297:0
crwdns2917034:0crwdne2917034:0
great guide, though i found the nine screws on the outside required a t5 tip, while the 5 under the feet looked like they were either j100 or j1000, but a philips head worked.
