crwdns2915892:0crwdne2915892:0
This guide will show you how to replace the motherboard
crwdns2942213:0crwdne2942213:0
-
-
Remove the plastic cover over the batteries on both sides of the device.
-
-
-
Remove the batteries (may require a plastic opening tool or spudger to pop the batteries out).
-
-
-
Using the Philips Screwdriver, remove the top 2 screws.
-
-
-
Using the Philips screwdriver, remove the bottom 2 screws (2.5mm).
-
-
-
-
Remove four surrounding T5 screws as shown
-
-
-
Remove all four purple bumpers. You may have to bend the metal surround out of the way.
-
-
-
Remove metal surround from the Jukebox. You may have to straighten out tabs that were bent during disassembly.
-
-
crwdns2935267:0crwdne2935267:0Desoldering Pump$3.99
-
Desolder the motherboard from the frame at the eight locations shown. You may need to use a desoldering pump.
-
-
-
Desolder the remaining two points on the backside of the Jukebox.
-
The Motherboard should now be free from the frame and ready for repair or replacement.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.