crwdns2915892:0crwdne2915892:0
This repair will need:
A T8 Torx screwdriver.
crwdns2942213:0crwdne2942213:0
-
-
After completing the initial disassembly, you may proceed to hard drive replacement.
-
-
-
First, you will need to remove the five T8 torx screws that mount the hard drive to the internal frame.
-
Next, you will remove the mounting frame and the plastic shield.
-
-
-
-
You can use a spudger (tool shown in photo) to remove the ribbon cable from the hard drive.
-
-
-
Carefully, pry the ribbon away from the pins.
-
-
-
Attach the ribbon cable to the new hard drive and follow steps 1-3, in reverse, to complete the installation.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:04crwdne2935229:0