crwdns2915892:0crwdne2915892:0
In this guide, we'll walk you through the screen replacement process and provide any warnings or precautions you should keep in mind. Remember to handle your device with care and follow the specific instructions for your device to avoid damaging other components.
crwdns2942213:0crwdne2942213:0
-
-
Turn off the device using the power button.
-
Using fingernails/a pry tool, separate the back panel of the device. This may require some force, as they are connected by push tabs.
-
-
-
Use your fingers to unclip the ribbon connector and then pull the ribbon out of the connector.
-
This ribbon connects the power button and stops the device from turning on.
-
-
-
Locate the four (0.4 mm) screws positioned near the cameras at the top of the device, and use a screwdriver to unscrew them. (Circles).
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
To disconnect the ribbon connectors, first, you need to flip up the tabs located above the ribbon gently. This will release the ribbon from the connector. Then, you can use tweezers to gently pull the ribbon out of the connector. Remember to be careful and avoid pulling too hard to prevent damage to the ribbon or connector.
-
-
-
Remove the glass screen by unfastening all of the clasps located around the outer edge of the screen.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
University of North Texas, Team 3-7, Saru Jimmy Spring 2023 crwdns2935289:0University of North Texas, Team 3-7, Saru Jimmy Spring 2023crwdne2935289:0
UNT-SARU JIMMY-S23S3G7
crwdns2931471:04crwdne2931471:0
crwdns2935297:04crwdne2935297:0
