crwdns2915892:0crwdne2915892:0
This guide will show you how to replace the Anne Pro 2 keyboard housing to a Zero-Degree case. This case is better for smaller hands, as well as more ergonomic. You can 3D print this case (link provided in Parts section).
crwdns2942213:0crwdne2942213:0
-
-
Unplug the Anne Pro 2 Keyboard.
-
Turn off the Anne Pro 2 Keyboard using the switch on the bottom.
-
-
-
Using a keycap remover, remove the the following keycaps: Left Alt, Space Bar, Right Shift, Backslash, Y, H, and the Tab key.
-
-
-
Using a Torx T5 bit, remove the five screws from the keyboard.
-
-
-
-
Lift the keyboard slowly from the bottom side.
-
-
-
Gently unplug the battery connector by wiggling it back and forth.
-
-
-
Remove the PCB from the main case.
-
Gently lower the PCB into the Zero-Degree housing from the top side first.
-
Firmly press it in once you have lowered it.
-
-
-
Screw the five T5 Torx screws back into place.
-
-
-
Take the seven keycaps you removed and gently place them in their intended spots on the keyboard.
-
Firmly press them in, ensuring they are flush with the rest of the keys.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0
crwdns2915084:0crwdne2915084:0
York University, Team S2-G3, Melo-Thaiss Fall 2020 crwdns2935289:0York University, Team S2-G3, Melo-Thaiss Fall 2020crwdne2935289:0
YORK-MELO-THAISS-F20S2G3
crwdns2934841:01crwdne2934841:0
crwdns2935297:02crwdne2935297:0
crwdns2917034:0crwdne2917034:0
Anne Pro 2 Software manage the illumination, open the mobile App and choose a pre-programmed scheme or design your own pattern, with a distinct colour for each key if desired. The programmes are easy to use and work on both Mac and PC.
Visit Here- https://www.techtoreview.com/top-picks/a...
