crwdns2915892:0crwdne2915892:0
This guide will show you how to reattach a charm onto an anklet.
crwdns2942213:0crwdne2942213:0
-
-
To start, decide where on the chain you wish to place the charm. Thread the headpin through the chain link, and then place the charm on the headpin next to the chain.
-
-
-
Bend the head pin in half, with the chain and charm at the apex of the bend.
-
-
-
Cross the head pin to create a loop. Pull as tightly as possible.
-
-
-
-
Use round nose pliers and your hands to twist the head pin, closing off the loop. Make the twists as tight as possible. Twist 2-4 times.
-
-
-
Use semi-flush side cutters to cut the extra length off of the head pin.
-
-
-
Use round-nose pliers to fold the twisted head pin so it is flush with itself.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.