crwdns2915892:0crwdne2915892:0
The replacement of the motherboard requires the complete removal of the battery, trigger buttons, joy sticks, and vibrations motors. All of which will require soldering for removal.
crwdns2942213:0crwdne2942213:0
-
-
Lay the controller face down on a flat surface and remove the seven 9mm Phillips #0 screws on the back of the controller.
-
Lift up and remove the controller back plate.
-
-
-
Desolder the battery connection from the motherboard.
-
-
-
-
Unscrew the two 9mm Phillips #0 screws that secure the motherboard to the controller front plate.
-
-
-
Detach the main motherboard fom the front pate by carefully pulling it off.
-
-
-
Remove two button padding from the back of motherboard.
-
-
-
Desolder the four button connections from the motherboard.
-
Desolder the joy stick connections located on the front.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.