crwdns2915892:0crwdne2915892:0
This guide will show you how to replace your Acer Spin 3 SP315-51-757C fan and heat sink. Leaving your laptop on for long periods of time or leaving it in a hot room could lead to issues with your heatsink and fan. If your laptop has been overheating or having temperature problems then they may need to be replaced.
crwdns2942213:0crwdne2942213:0
-
-
Remove eleven Phillips #0 screws from the back panel.
-
-
-
Using an opening tool, pry open the back panel, starting at the silver screen hinges.
-
-
-
Lift the back panel off of the laptop.
-
-
-
-
Remove the two Phillips #0 screws holding the battery inside the laptop case.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Using either your hands or a pair of tweezers, carefully pull the battery's cable out of its motherboard port.
-
-
-
Using your hands, lift up on the battery from its slot, and carefully slide it away from you before fully lifting it out of the case.
-
-
-
Using a Phillips #0 screwdriver, remove the three screws that hold the fan on top of the motherboard.
-
-
-
Using a Phillips #0 screwdriver, remove the four screws that connect the heat sink to the motherboard.
-
-
-
Remove both the fan and the heat sink with your hands.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
University of North Texas, Team 5-2, Coppersmith Spring 2024 crwdns2935289:0University of North Texas, Team 5-2, Coppersmith Spring 2024crwdne2935289:0
UNT-COPPERSMITH-S24S5G2
crwdns2931471:04crwdne2931471:0
crwdns2935297:04crwdne2935297:0
