crwdns2915892:0crwdne2915892:0
Use this guide to replace the SSD in the Acer Nitro 5 Acer Nitro 5 AN515-53-55G9. This laptop comes with a SSD installed, this guide will show how to replace an new SSD.
crwdns2942213:0crwdne2942213:0
-
-
Flip the laptop upside down so that the bottom is facing up.
-
Identify the RAM tray on the bottom of the laptop.
-
-
-
Use the Phillips #0 screwdriver to remove the 9mm screw in the bottom left corner of the RAM tray covering.
-
Remove the RAM tray cover by prying up with a spudger.
-
-
-
Identify the Hard Drive tray to the left side of the laptop.
-
Remove screw with a #0 Philips screwdriver.
-
Lift up the Slot covering using a spunger.
-
-
-
Use the Phillips #0 screwdriver to remove the 9mm screws holding the back cover in place.
-
Remove the screws from the hard drive and remove it from the device.
-
-
-
-
Carefully remove the back shell from the device working your way around all the edges.
-
-
-
Removing the back shell of the computer and it will look like this.
-
The battery for the device is located at the bottom middle of the laptop at this orientation.
-
-
-
Locate the connector of the battery to the motherboard.
-
Using your fingers, slide out the connector.
-
-
-
Locate the SSD in the top right corner of the laptop.
-
-
-
Use the Phillips #0 screwdriver to remove the 3mm screw holding the SSD card in place.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:09crwdne2935229:0
crwdns2915084:0crwdne2915084:0
Appalachian State University, Team S2-G2, Menagarishvili Spring 2019 crwdns2935289:0Appalachian State University, Team S2-G2, Menagarishvili Spring 2019crwdne2935289:0
APSU-MENAGARISHVILI-S19S2G2
crwdns2931471:03crwdne2931471:0
crwdns2935297:09crwdne2935297:0
