crwdns2915892:0crwdne2915892:0
The wireless adapter is needed to connect to the Wi-Fi network or mobile network. This guide will demonstrate the wireless adapter replacement for the Acer Iconia Tab A501.
crwdns2942213:0crwdne2942213:0
-
-
Use a plastic opening tool to carefully separate the back cover, starting at the volume buttons.
-
Continue separating the back cover along the short side closest to the camera and around the device.
-
-
-
When separated enough, a little more than halfway around the device, the back cover will be easy to take off.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$3.99
-
Use the angled tweezers to disconnect the motherboard-battery cable from the white connector in the middle of the side opposite the docking port.
-
-
-
-
Remove all tape covering the wireless adapter.
-
-
-
Use the flat end of the standard Spudger to disconnect the two small rotatable connectors attached to the wireless adapter.
-
-
-
Use a Phillips #1 screwdriver to remove the two 3.0 mm Philips head screws holding the adapter down.
-
-
-
Carefully slide the adapter out to remove it.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.