crwdns2915892:0crwdne2915892:0
In order to remove the motherboard, you will need both a plastic opening tool and a Phillips #00 screwdriver. In addition to that, all the tape surrounding the motherboard will need to be removed.
crwdns2942213:0crwdne2942213:0
-
-
Open media port cover at the top of the tablet.
-
Use the Phillips #00 screwdriver to remove the 1 mm screw.
-
-
-
Using the metal spudger, carefully pry open the back cover.
-
-
-
-
Unplug the connection cord from the motherboard.
-
-
-
Try to remove the battery by pulling on the blue tabs.
-
If unsuccessful, use the black plastic spudger to gently break the glue bonds underneath and pull up to remove the battery.
-
-
-
Remove all of the tape surrounding the motherboard.
-
-
-
Starting with the 2 large connections use the plastic opening tool to gently pry on the connections and pop them out.
-
Now, disconnect the two smaller black and red cords from the motherboard.
-
-
-
Scrape away the small square sticker to reveal one small screw. Use the Phillips #00 screwdriver to remove the screw.
-
Using the same screwdriver remove the other three screws on the motherboard.
-
-
-
Using the small plastic tool, carefully pry the motherboard out of the device.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0
crwdns2915084:0crwdne2915084:0
USF Tampa, Team S1-G5, Nance Fall 2017 crwdns2935289:0USF Tampa, Team S1-G5, Nance Fall 2017crwdne2935289:0
USFT-NANCE-F17S1G5
crwdns2931471:04crwdne2931471:0
crwdns2935297:05crwdne2935297:0
crwdns2947410:01crwdne2947410:0
The button flex cable retaining clip is broken, do you have this available?
