crwdns2915892:0crwdne2915892:0
We well show you how to disassemble / take apart the tablet and how to change / replace the Touch screen. Before replacing, try to reconnect only the Touchscreen flex cable. Manual for this you can find on Acer Iconia B1 main page.
crwdns2942213:0crwdne2942213:0
crwdns2936621:0crwdne2936621:0
- 
   
   
- 
                     
            
Because I can't switch-off the tablet, I'm using the reset button to do this.
 - 
                     
            
With a cutter and a plastic tool remove the back cover.
 
 - 
                     
            
 - 
   
   
- 
                     
            
First, disconnect the battery.
 - 
                     
            
Now, disconnect the loudspeaker and remove the back cover.
 - 
                     
            
Remove all scotch tapes and disconnect the touch screen flex cable...
 - 
                     
            
LCD display flex cable,
 - 
                     
            
the microphone,
 - 
                     
            
and the WiFi and Bluetooth antennas flex cables.
 
 - 
                     
            
 - 
   
   
- 
                     
            
Unscrew 5x screws and rmove the main board.
 
 - 
                     
            
 - 
   
   
- 
                     
            
The battery is glued to the LCD display metal shield with a double sided adhesive tape.
 - 
                     
            
Use plastic tools and carefully remove it.
 - 
                     
            
Remove all tapes from the LCD display metal shield.
 
 - 
                     
            
 - 
                     
                                                
 - 
   
   
- 
                     
            
The LCD display is held by metal frame and some locking clips on it.
 - 
                     
            
Use a cutter and a plastic tool to separate the LCD.
 - 
                     
            
Now, install the new LCD display and reassemble the tablet.
 
 - 
                     
            
 - 
   
   
- 
                     
            
Warm up the touch screen.
 - 
                     
            
Start separating from one of the corners. With a cutter, make place for a plastic tool.
 - 
                     
            
Keep warm the touchscreen to separate it easily.
 - 
                     
            
For us is important to keep only the frame.
 
 - 
                     
            
 - 
   
   
- 
                     
            
Use again hot air and a plastic tools to separate the metal screen frame / holder.
 
 - 
                     
            
 - 
   
   
- 
                     
            
Before installing the new touch screen, clean the frame and put double side adhesive tape.
 - 
                     
            
For the cleaning you can use an alcohol.
 
 - 
                     
            
 - 
   
   
- 
                     
            
Again use a double side adhesive tape to install the the metal LCD frame.
 
 - 
                     
            
 - 
   
   
- 
                     
            
Reassemble the tablet.
 - 
                     
            
.
 - 
                     
            
Did you do it successfully?
 
 - 
                     
            
 
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:06crwdne2935229:0
crwdns2947410:01crwdne2947410:0
Hello, i have followed all these instructions but the touch screen desn't work in spite of a reset by the little button and a wipe.
Please, how can i resolve this problem?