crwdns2933423:0crwdne2933423:0

Acer Iconia A100 Speakers Replacement

crwdns2942213:0crwdne2942213:0

  1. Acer Iconia A100 Speakers Replacement, Battery: crwdns2935265:01crwdnd2935265:01crwdnd2935265:01crwdne2935265:0
    • Start at any side of the tablet.

    • Begin to take apart the tablet with a plastic opening tool along the sides of the tablet.

    • Work your way around the tablet.

    • There are four side pieces in total.

  2. Acer Iconia A100 Speakers Replacement: crwdns2935265:02crwdnd2935265:01crwdnd2935265:01crwdne2935265:0
    • Remove the five 4 mm screws from the edges of the tablet with a Phillips #00 screwdriver.

  3. Acer Iconia A100 Speakers Replacement: crwdns2935265:03crwdnd2935265:01crwdnd2935265:01crwdne2935265:0
    • Carefully separate the back piece from the device using a plastic opening tool.

    • Remember to open along the entire perimeter of the tablet.

  4. Acer Iconia A100 Speakers Replacement: crwdns2935265:04crwdnd2935265:01crwdnd2935265:01crwdne2935265:0
    • Turn the tablet over so that the battery is facing upwards.

    • Remove the four 4mm screws located around the battery.

  5. Acer Iconia A100 Speakers Replacement: crwdns2935265:05crwdnd2935265:01crwdnd2935265:02crwdne2935265:0 Acer Iconia A100 Speakers Replacement: crwdns2935265:05crwdnd2935265:02crwdnd2935265:02crwdne2935265:0
    • Use the tip of a plastic spudger or opening tool to gently push the connector head out of its socket.

    • Use your fingers or the flat edge of a plastic opening tool to lift the battery up and off of the device.

    • Be sure to not have any water around the device while removing the battery.

    • Be sure to be cautious while removing the battery and remove carefully; avoid ripping the wires attached to the battery.

  6. Acer Iconia A100 Speakers Replacement, Speakers: crwdns2935265:06crwdnd2935265:01crwdnd2935265:03crwdne2935265:0 Acer Iconia A100 Speakers Replacement, Speakers: crwdns2935265:06crwdnd2935265:02crwdnd2935265:03crwdne2935265:0 Acer Iconia A100 Speakers Replacement, Speakers: crwdns2935265:06crwdnd2935265:03crwdnd2935265:03crwdne2935265:0
    • Locate the speakers module, which consists of 2 square black speakers connected by wires.

    • Locate the white and blue Home Key FFC ribbon cable between the speakers.

    • Use the tip of a spudger or opening tool to lift up and flip the small hinge on the connector. Then gently pull the FFC ribbon cable out its connector socket.

    • While a metal spudger tool is shown here and may be used, it is best to use a plastic spudger or opening tool when possible. It is easier to damage cables when using metal tools, so be extra cautious when using a metal spudger like the one shown here!

  7. Acer Iconia A100 Speakers Replacement: crwdns2935265:07crwdnd2935265:01crwdnd2935265:02crwdne2935265:0 Acer Iconia A100 Speakers Replacement: crwdns2935265:07crwdnd2935265:02crwdnd2935265:02crwdne2935265:0
    • Locate the speaker cable. Use your fingers to pinch each side of the black head of the speaker cable, and gently pull it out of its socket.

    • The metal spudger shown in the photo is used only to identify the speaker cable, not remove it.

    • If you're unable to get a good grip on the black connector head itself, gently pull from the wires near the connector head's base.

    • Be sure to pull on the wires near the base and evenly on the full width of the wires so no individual wire is over-strained, which may cause damage!

  8. Acer Iconia A100 Speakers Replacement: crwdns2935265:08crwdnd2935265:01crwdnd2935265:02crwdne2935265:0 Acer Iconia A100 Speakers Replacement: crwdns2935265:08crwdnd2935265:02crwdnd2935265:02crwdne2935265:0
    • Unscrew the 4mm Phillips screws securing the speakers module to the device using a Phillips #00 screwdriver.

    • There are two 4mm screws in total (one screw securing each speaker).

  9. Acer Iconia A100 Speakers Replacement: crwdns2935265:09crwdnd2935265:01crwdnd2935265:02crwdne2935265:0 Acer Iconia A100 Speakers Replacement: crwdns2935265:09crwdnd2935265:02crwdnd2935265:02crwdne2935265:0
    • Now both speakers should be free. Use the edge of a spudger tool to lift each speaker off the device, or use your hands to simultaneously lift each square black speaker off of the device.

    • If intact, the two speakers should be connected by wires, forming a one-piece speakers module.

crwdns2915888:0crwdne2915888:0

To reassemble your device, follow these instructions in reverse order.

crwdns2935227:0crwdne2935227:0

Omar Acosta

crwdns2935283:003/03/15crwdne2935283:0

526 crwdns2915208:0crwdne2915208:0

crwdns2935297:03crwdne2935297:0

crwdns2915084:0crwdne2915084:0

Sam Houston State, Team 13-3, Blackburne Winter 2015 crwdns2935289:0Sam Houston State, Team 13-3, Blackburne Winter 2015crwdne2935289:0

SHSU-BLACKBURNE-W15S13G3

crwdns2934841:01crwdne2934841:0

crwdns2935297:03crwdne2935297:0

crwdns2947412:00crwdne2947412:0

crwdns2917038:0crwdne2917038:0

crwdns2936625:0crwdne2936625:0:

crwdns2936751:024crwdne2936751:0 0

crwdns2936753:07crwdne2936753:0 1

crwdns2936753:030crwdne2936753:0 1

crwdns2942667:0crwdne2942667:0 374