crwdns2915892:0crwdne2915892:0
This guide will help you replace the front panel of the Acer Aspire One 751h-1948.
crwdns2942213:0crwdne2942213:0
-
-
Close the laptop and flip it over to view the back of the laptop.
-
-
-
Unlock the right side of the battery by sliding the battery lock to the right. Then slide the left lock to the left and remove the battery.
-
-
-
Unscrew the two Phillips #0 (M2-L2.5 mm) holding down the network card panel.
-
-
-
Unplug the two connecting cables by lifting them up. They should unclip easily.
-
-
-
Remove the screw Phillips #0 (M2-L3 mm) holding down the network card. Pull out the card.
-
-
-
-
Unscrew the Phillips 0# (M2 L2.5 mm) screw and remove the cover panel.
-
-
-
Remove the hard drive by sliding it to the left and pull it out.
-
-
-
Unscrew the Phillips #0 (M2-L2.5 mm) screws.
-
-
-
Use the plastic opening tool to push in each of the four clips and carefully lift the keyboard.
-
-
-
When you remove the keyboard, be careful not to damage the ribbon cable that attaches it to the motherboard.
-
Unplug the ribbon cable by gently lifting the black tab up. Then remove the cable.
-
-
-
Use the screwdriver to remove all the Phillips #00 (M2-L2.5 mm) screws shown here.
-
-
-
Flip the laptop over and remove all the Phillips #0 (M2-L5 mm) screws under the keyboard.
-
Remove all the Phillips #0 (M2-L2.5 mm) screws
-
-
-
Lift the small black clip and remove the ribbon cable before proceeding.
-
-
-
Separate the front panel from the back panel, by sliding your thumb nail between them.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.