crwdns2915892:0crwdne2915892:0
If your Acer Aspire One 722 isn’t producing clear visuals - distorted, cracked, or dented - use this repair guide to safely replace the screen.
Before using this guide, inspect the screen for debris that may be interfering with the visual quality. Be sure to test the quality of the screen by turning on the device to confirm the screen is faulty and is in need of replacement.
Step 5 requires you to slowly remove the glass casing from the device. Visit your local electronics store that recycles used materials to safely dispose of the faulty screen.
Before beginning, make sure to power off your device completely and disconnect from any external power source.
crwdns2942213:0crwdne2942213:0
-
-
Power down the netbook by pressing the power button on the top left corner.
-
-
-
Close the netbook and flip it over so that the back is facing up.
-
-
-
Slide the button below the battery to the right while simultaneously pulling the battery out.
-
-
-
If necessary, remove the old battery and replace it with a new one.
-
-
-
-
Remove the black rubber clips from the bottom right and left of the netbook screen.
-
-
-
Remove the screws under the black caps.
-
-
-
Slowly separate the screen casing from the screen.
-
-
-
Remove the screws located on the four corners of the screen.
-
-
-
On the bottom left of the screen there is a cord attached. Remove the tape that is attached to the screen.
-
-
-
On the green board, remove the two screws.
-
Remove the board.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:04crwdne2935229:0
crwdns2915084:0crwdne2915084:0
UMass Dartmouth, Team 5-6, Gulbrandsen Fall 2015 crwdns2935289:0UMass Dartmouth, Team 5-6, Gulbrandsen Fall 2015crwdne2935289:0
UMASSD-GULBRANDSEN-F15S5G6
crwdns2931471:03crwdne2931471:0
crwdns2935297:010crwdne2935297:0
