crwdns2942213:0crwdne2942213:0
-
-
Remove the two 6mm J0 screws located in the right and left side of the battery.
-
-
-
Remove the connector from the motherboard.
-
-
-
Remove the two 6mm Phillips J0 screws located in the right and left side of heatsink mounts.
-
Remove the four 6mm Phillips J0 screws located on the heatsink power mount.
-
Lift and remove heatsink from motherboard completely.
-
-
-
-
Remove wi-fi card by pulling from socket.
-
-
-
Remove screen connector by pulling it upwards.
-
-
-
Remove speaker connector from the motherboard by pulling on the tab.
-
-
-
Remove the four blue tabbed ribbon connectors to the motherboard by lifting white clamps and pulling out connector.
-
-
-
Remove black ribbon connector by lifting white clamp and pulling connector out.
-
-
-
Finally lift motherboard from narrow side and jiggle it out so all ports going through the laptop case on the left slide out.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.