crwdns2942213:0crwdne2942213:0
-
-
To mount the keyboard, place it on the chassis and press until it clicks.
-
-
-
To mount the network card, we have to put it diagonally if it can not be removed.
-
When it is already on, it is only necessary to adjust the screw.
-
To connect the two cables you must place them on their receptacles and press until they click in.
-
-
-
-
To mount the processor, make sure you put it in straight, because if the pins bend, it will no longer work.
-
When it is in, you only have to adjust the screw to secure it.
-
-
-
To mount the heatsink, we have to take good care of it, and if the processor could not be reheated, it would be wrong.
-
When it is well-seated replace the four screws to fix it.
-
Set the heatsink to the fan.
-
-
-
When it is clean, return the four screws to it so that it does not come apart.
-
Then, place it in its place on the motherboard and secure it.
-
Do not forget to connect the cable.
-
-
-
To place the RAM we have to be careful that it can also be broken as the network card.
-
We have to put it diagonally so it does not break.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0
crwdns2934873:0crwdne2934873:0
100%
crwdns2934885:0crwdne2934885:0 crwdns2934875:0crwdne2934875:0
crwdns2934877:0crwdne2934877:0 ›
